ADH Communications just joined Manta.

ADH Communications becomes the manufactures representative for YR20 for the SouthEast.

ADH Communications becomes an authorized reseller for SonicWall.

ADH Communications just joined the Chamber of Commerce of Gwinnett County!

ADH Communications has projects going on in 7 different states!

I have worked with Hartmut and ADH on several occasions. “The ADH goal of providing one with the best technology yet cost effective solutions shows their concern for their customers”
-Tim O’Neill  - The “Oldcommguy™”
B.T. Solutions, Inc.

A leading supplier for converged networks

Provides the best possible solution at the best possible price

Is a partner to our customers

Helps with all your needs to design, install and maintain your mission critical networks

Providing, Installing & Supporting
-Wired and wireless networks
-Triple play networks infrastructure
-High speed back-bone networks
-Industrial Ethernet production control networks
-And more

PO Box 443
Lake Geneva, WI 53147


or simply fill out the form on the contact page.

ADH Communications Manta Profile


Fiber Optics

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z Numbers


IC: See integrated circuit.
ICEA: Abbreviation for Insulated Cable Engineers Association. A technical professional organization that contributes to the standards of insulated cable in these four areas: power cables, communication cables, portable cables, and control and instrumentation. Within this organization there are subcommittees that concentrate on one of the four areas.
IDP: See integrated detector/preamplifier.
IEEE: Abbreviation for Institute of Electrical and Electronic Engineers. A technical professional association that contributes to voluntary standards in technical areas ranging from computer engineering, biomedical technology and telecommunications, to electric power, aerospace and consumer electronics, among others.
IF: Abbreviation for Intermediate Frequency. A frequency to which a carrier frequency is shifted as an intermediate step in transmission or reception.
IIN: See interferometric intensity noise.
Impedance: The total passive opposition offered to the flow of electric current. Determined by the particular combination of resistance, inductive reactance, and capacitive reactance in a given circuit. A function of frequency, except when in a purely resistive network. 
Impedance Matching: The connection of an additional impedance to an existing one in order to achieve a specific effect, such as to balance a circuit or to reduce reflection in a transmission line.
Index-matching Fluid: A fluid whose index of refraction nearly equals that of the fibers core. Used to reduce Fresnel reflection loss at fiber ends. Also known as index-matching gel.
Index of Refraction The ratio of the velocity of light in free space to the velocity of light in a fiber material. Always greater than or equal to one. Also called refractive index.

n = C/V

c = The speed of light in a vacuum.
v = The speed of the same wavelength in the fiber material.

Infrared (IR): The region of the electromagnetic spectrum bounded by the long-wavelength extreme of the visible spectrum (about 0.7 µm) and the shortest microwaves (about 0.1 µm).
Infrared Emitting Diodes: LEDs that emit infrared energy (830 nm or longer).
Infrared Fiber: Colloquially, optical fibers with best transmission at wavelengths of 2 mm or longer, made of materials other than silica glass. See also fluoride glasses.
InGaAs: Abbreviation for indium gallium arsenide. Generally used to make high-performance long-wavelength detectors.
InGaAsP: Abbreviation forindium gallium arsenide phosphide. Generally used for long-wavelength light emitters.
Injection Laser Diode (ILD): A laser employing a forward-biased semiconductor junction as the active medium. Stimulated emission of coherent light occurs at a PIN junction where electrons and holes are driven into the junction.
In-line Amplifier: An EDFA or other type of amplifier placed in a transmission line to strengthen the attenuated signal for transmission onto the next, distant site. In-line amplifiers are all-optical devices.

In-line Amplifier

InP: Indium Phosphide. A semiconductor material used to make optical amplifiers and HBTs.
Insertion Loss: The loss of power that results from inserting a component, such as a connector, coupler (illustrated), or splice, into a previously continuous path.
Insertion Loss
Integrated Circuit (IC): An electronic circuit that consists of many individual circuit elements, such as transistors, diodes, resistors, capacitors, inductors, and other passive and active semiconductor devices, formed on a single chip of semiconducting material and mounted on a single piece of substrate material.
Integrated Detector/Preamplifier (IDP): A detector package containing a PIN photodiode and transimpedance amplifier.
Integrated Systems Digital Network (ISDN): An integrated digital network in which the same time-division switches and digital transmission paths are used to establish connections for services such as telephone, data, electronic mail and facsimile. How a connection is accomplished is often specified as a switched connection, non-switched connection, exchange connection, ISDN connection, etc.
Intensity: The square of the electric field strength of an electromagnetic wave. Intensity is proportional to irradiance and may get used in place of the term "irradiance" when only relative values are important.
Intensity Modulation (IM): In optical communications, a form of modulation in which the optical power output of a source varies in accordance with some characteristic of the modulating signal.
Interchannel Isolation: The ability to prevent undesired optical energy from appearing in one signal path as a result of coupling from another signal path. Also called crosstalk.
Interference: Any extraneous energy, from natural or manmade sources, that impedes the reception of desired signals. The interference may be constructive or destructive, resulting in increased or decreased amplitude, respectively.  
Interferometer: An instrument that uses the principle of interference of electromagnetic waves for purposes of measurement. Used to measure a variety of physical variables, such as displacement (distance), temperature, pressure, and strain.
Interferometric Intensity Noise (IIN): Noise generated in optical fiber caused by the distributed backreflection that all fiber generates mainly due to Rayleigh scattering. OTDRs make use of this scattering power to deduce the fiber loss over distance.
Interferometric Sensors: Fiber optic sensors that rely on interferometric detection.
Inter-LATA: 1. Between local access and transport areas (LATAs). 2. Services, revenues, and functions related to telecommunications that begin in one LATA and that terminate in another or that terminate outside of the LATA.
Intermodulation (Mixing): A fiber nonlinearity mechanism caused by the power dependant refractive index of glass. Causes signals to beat together and generate interfering components at different frequencies. Very similar to four wave mixing.
International Telecommunications Union (ITU): A civil international organization, headquartered in Lake Geneva, Switzerland, established to promote standardized telecommunications on a worldwide basis. The ITU-R and the ITU-T are committees under the ITU, which is recognized by the United Nations as the specialized agency for telecommunications.
Internet: A worldwide collection of millions of computers that consists mainly of the world wide web and e-mail.
Intersymbol Interference: 1) In a digital transmission system, distortion of the received signal, manifested in the temporal spreading and consequent overlap of individual pulses to the degree that the receiver cannot reliably distinguish between changes of state, i.e., between individual signal elements. At a certain threshold, intersymbol interference will compromise the integrity of the received data. Intersymbol interference may be measured by eye patterns.
Intrinsic Losses: Splice losses arising from differences in the fibers being spliced.
IP: Abbreviation for Internet protocol. A standard protocol, developed by the DOD, for use in interconnected systems of packet-switched computer communications networks.
IPI: Abbreviation for intelligent peripheral interface as defined by ANSI X3T9.3 document.
IR: See infrared.

IRE Unit: An arbitrary unit created by the Institute of Radio Engineers to describe the amplitude characteristic of a video signal, where pure white is defined as 100 IRE with a corresponding voltage of 0.714 Volts and the blanking level is 0 IRE with a corresponding voltage of 0.286 Volts.

IRE Units and Voltages for NTSC Video Format
Irradiance: Power per unit area.
ISA: Abbreviation forInstrumentation, Systems, and Automation Society. An international, non-profit, technical organization. The society fosters advancement of the use of sensors, instruments, computers, and systems for measurement and control in variety of applications
ISDN: See integrated services digital network.
ISO: Abbreviation for International Standards Organization. Established in 1947, ISO is a worldwide federation of national standards committees from 140 countries. The organization promotes the development of standardization throughout the world with a focus on facilitating the international exchange of goods and services, and developing the cooperation of intellectual, scientific, technological, and economical activities.
ISP: Abbreviation for Internet service provider. A company or organization that provides Internet connections to individuals or companies via dial-up, ISDN, T1, or some other connection.
Isolation: See near-end crosstalk.
ITU: See International Telecommunications Union.



Jacket: The outer, protective covering of the cable. Also called the cable sheath

Cable cross-section illustrating the outer jacket

Jitter: Small and rapid variations in the timing of a waveform due to noise, changes in component characteristics, supply voltages, imperfect synchronizing circuits, etc. See also DDJ, DCD, and RJ.
JPEG: Abbreviation for joint photographers expert group. International standard for compressing still photography.
Jumper: A short fiber optic cable with connectors on both ends.



k: Abbreviation for kilo. One thousand or 103.
K: Abbreviation for Kelvin. Measure of temperature where pure water freezes at 273?and boils at 373?
kBaud: One thousand symbols of data per second. Equivalent to 1 kb/s for binary signaling.
Kevlar: A very strong, very light, synthetic compound developed by DuPont which is used to strengthen optical cables.
Keying: Generating signals by the interruption or modulation of a steady signal or carrier.
kg: Abbreviation for kilogram. Approximately 2.2 pounds.
kHz: One thousand cycles per second.
km: Abbreviation for kilometer. 1 km = 3,280 feet or 0.62 miles.


A B C D E F G H I J K L M N O P Q R S T U V W X Y Z Numbers

Copyright © 2010 by David R. Goff. Used by permission. All rights reserved.